9.5.1.2 Packet Tracer – Putting it All Together Answers Packet Tracer – Putting it All Together (Answers Version) Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only. Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway R1 G0/1 209.165.201.1 255.255.255.224 N/A S1 VLAN 1 209.165.201.2 Continue reading. 9.4.1.2 Packet Tracer - Skills Integration Challenge Instructions d47erj2p52n2. Download & View 9.4.1.2 Packet Tracer - Skills Integration Challenge Instructions as PDF for free.
CISCO - CCNA Routing and Switching - Scaling Networks - Packet Tracer - 1.3.1.3 Packet Tracer - Skills Integration Challenge Download PKA. 2.0.1.2 Class Activity - Identify Running Processes 2.1.4.5 Lab - Configure Extended VLANs, VTP, and DTP. 1.2.4.4 Packet Tracer – Representing the Network Instructions Answers Objectives. Part 1: Overview of the Packet Tracer Program. Part 2: Exploring LANs, WANs, and Internets. Packet Tracer is a fun, take-home, flexible software program which will help.
8.4.1.2 Packet Tracer – Skills Integration Challenge
From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to 'Online Test' link below.
Version 5.02 | Version 5.03 | Version 6.0 | Online Assessment |
Chapter 8 Exam | Chapter 8 Exam | Chapter 8 Exam | Online Test |
Next Chapter | |||
Chapter 9 Exam | Chapter 9 Exam | Chapter 9 Exam | Online Test |
Lab Activities | |||
8.2.2.7 Packet Tracer – Configuring OSPFv2 in a Single Area | |||
8.3.3.5 Packet Tracer – Configuring Basic OSPFv3 in a Single Area | |||
8.4.1.2 Packet Tracer – Skills Integration Challenge |
Packet Tracer – Skills Integration Challenge (Answer Version)
Answer Note: Red font color or gray highlights indicate text that appears in the Answer copy only.
Topology
8.4.1.2 Packet Tracer – Skills Integration Challenge
Addressing Table
Device | Interface | IPv4 Address | Subnet Mask | Default Gateway |
IPv6 Address/Prefix | ||||
RA | G0/0 | 172.31.0.1 | 255.255.254.0 | N/A |
S0/0/0 | 172.31.4.1 | 255.255.255.252 | N/A | |
RB | G0/0 | 172.31.2.1 | 255.255.254.0 | N/A |
2001:DB8:1::1/64 | N/A | |||
S0/0/0 | 172.31.4.2 | 255.255.255.252 | N/A | |
S0/0/1 | 2001:DB8:2::1/64 | N/A | ||
RC | G0/0 | 2001:DB8:3::1/64 | N/A | |
S0/0/0 | 2001:DB8:2::2/64 | N/A | ||
PC-A | NIC | 172.31.1.254 | 255.255.254.0 | 172.31.0.1 |
PC-B | NIC | 172.31.3.254 | 255.255.254.0 | 172.31.2.1 |
2001:DB8:1::2/64 | FE80::1 | |||
PC-C | NIC | 2001:DB8:3::2/64 | FE80::3 |
Background
In this Skills Integration Challenge, your focus is OSPFv2 and OSPFv3 configurations. You will configure IP addressing for all devices. Then you will configure OSPFv2 routing for the IPv4 portion of the network and OSPFv3 routing for the IPv6 portion of the network. One router will be configured with both IPv4 and IPv6 configurations. Finally, you will verify your configurations and test connectivity between end devices.
Note: This activity is graded using a combination of assessment items and connectivity tests. The instructions window will not show your score. To see your score, click Check Results > Assessment Items. To see the results of a specific connectivity test, click Check Results > Connectivity Tests.
Requirements
- Use the following requirements to configure RA addressing and OSPFv2 routing:
- IPv4 addressing according to the Addressing Table
- Process ID 1
- Router ID 1.1.1.1
- Network address for each interface
- LAN interface set to passive (do not use the default keyword)
- Use the following requirements to configure RB addressing, OSPFv2 routing and OSPFv3 routing:
- IPv4 and IPv6 addressing according to the Addressing Table
- Set the Gigabit Ethernet 0/0 Link Local address to FE80::1
- OSPFv2 routing requirements:
- Process ID 1
- Router ID 2.2.2.2
- Network address for each interface
- LAN interface set to passive (do not use the default keyword)
- OSPFv3 routing requirements:
- Enable IPv6 routing
- Process ID 1
- Router ID 2.2.2.2
- Enable OSPFv3 on each interface
- IPv4 and IPv6 addressing according to the Addressing Table
- Use the following requirements to configure RC addressing and OSPFv3 routing:
- IPv6 addressing according to the Addressing Table
- Set the Gigabit Ethernet 0/0 Link Local address to FE80::3
- OSPFv3 routing requirements:
- Enable IPv6 routing
- Process ID 1
- Router ID 3.3.3.3
- Enable OSPFv3 on each interface
- IPv6 addressing according to the Addressing Table
- Configure PCs with appropriate addressing.
- PCA and PCB IPv4 addressing must use the last assignable address in the IPv4 subnet.
- PCB and PCC IPv6 addressing must use the second assignable address in the IPv6 network and the link-local FE80 address as the default gateway.
- Finish the Addressing Table documentation
- Verify your configurations and test connectivity
- OSPF neighbors should be established and routing tables should be complete
- Pings between PCA and PCB should be successful
- Pings between PCB and PCC should be successful
Note: If OSPFv3 has not converged, check the status of interfaces using the show ip ospf interface command. Sometimes, the OSPFv3 process needs to deleted from the configuration and reapplied to force convergence.
!—————————-
!RA
!—————————-
ena
config t
hostname RA
interface GigabitEthernet0/0
ip address 172.31.0.1 255.255.254.0
no shut
interface Serial0/0/0
ip address 172.31.4.1 255.255.255.252
no shut
router ospf 1
router-id 1.1.1.1
passive-interface GigabitEthernet0/0
network 172.31.0.0 0.0.1.255 area 0
network 172.31.4.0 0.0.0.3 area 0
end
!RA
!—————————-
ena
config t
hostname RA
interface GigabitEthernet0/0
ip address 172.31.0.1 255.255.254.0
no shut
interface Serial0/0/0
ip address 172.31.4.1 255.255.255.252
no shut
router ospf 1
router-id 1.1.1.1
passive-interface GigabitEthernet0/0
network 172.31.0.0 0.0.1.255 area 0
network 172.31.4.0 0.0.0.3 area 0
end
From year to year, Cisco has updated many versions with difference questions. The latest version is version 6.0 in 2018. What is your version? It depends on your instructor creating your class. We recommend you to go thought all version if you are not clear. While you take online test with netacad.com, You may get random questions from all version. Each version have 1 to 10 different questions or more. After you review all questions, You should practice with our online test system by go to 'Online Test' link below.
Version 5.02 | Version 5.03 | Version 6.0 | Online Assessment |
Chapter 8 Exam | Chapter 8 Exam | Chapter 8 Exam | Online Test |
Next Chapter | |||
Chapter 9 Exam | Chapter 9 Exam | Chapter 9 Exam | Online Test |
Lab Activities | |||
8.2.2.7 Packet Tracer – Configuring OSPFv2 in a Single Area | |||
8.3.3.5 Packet Tracer – Configuring Basic OSPFv3 in a Single Area | |||
8.4.1.2 Packet Tracer – Skills Integration Challenge |
9.5.1.2 Packet Tracer – Putting it All Together Answers
Packet Tracer – Putting it All Together (Answers Version)
Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only.
Topology
Addressing Table
Device | Interface | IP Address | Subnet Mask | Default Gateway |
R1 | G0/1 | 209.165.201.1 | 255.255.255.224 | N/A |
S1 | VLAN 1 | 209.165.201.2 | 255.255.255.224 | N/A |
Server | NIC | 209.165.201.30 | 255.255.255.224 | 209.165.201.1 |
Background / Scenario
Packet Tracer 6.5.1.3 Answers
This activity includes many of the skills that you have acquired during your Networking Essentials studies. First, you will configure the IP addresses on network devices in a simplified network. Second, you will set up the wireless configurations in home network. Finally, you will verify your implementation by testing end-to-end connectivity by accessing the web server, www.server.pka, and router R1 using SSH in the simplified network.
Implementation
Router R1
- Configure the device name according to the Addressing Table.
- Configure the IP address on G0/1 interface according to the IP addressing table and enable the interface.
- Create a banner that warns anyone accessing the device that unauthorized access is prohibited. Make sure to include the word warning in the banner.
- Assign cisco as the console password and enable login.
- Assign class as the encrypted privileged EXEC mode password.
- Encrypt all plaintext passwords.
Configure SSH on R1:
- Set the domain name to networking.pka
- Generate a 1024-bit RSA key.
- Create a user with a username admin with password cisco123
- Configure the VTY lines for SSH access.
- Use the local user profiles for authentication.
Switch S1
- Configure the device name according to the Addressing Table.
- Configure the IP address of the switch on SVI interface according to the IP addressing table and enable the interface.
Server
Configure the IP address of the server according to the IP addressing table.
Wireless Router in the Home
Enter the Home cluster. From the web browser on PC, configure the following:
![Tracer Tracer](/uploads/1/1/9/8/119877067/927040928.jpg)
Initial Wireless Router IP Address: ……………………… 192.168.1.1
Username / Password: ………………………………………..admin / admin
SSID: …………………………………………………………………MyHome
Security Mode: ……………………………………………………WPA2 Personal
Passphrase: ………………………………………………………..123Cisco
DHCP Configuration:
Wireless Router IP Address:……………………………….. 192.168.20.1
Starting IP Address: ……………………………………………192.168.20.101
![9.4 9.4](/uploads/1/1/9/8/119877067/772180573.png)
Maximum Number:……………………………………………. 100
DNS 1: ……………………………………………………………… 209.165.201.30
End Devices in the Home
Configure the wireless settings so the end devices can access www.server.pka.
SSID: ……………………..MyHome
Security Mode:……….. WPA2 Personal or WPA2-PSK
Passphrase: ……………123Cisco
Note: For Tablet PC and Pda, use the Config tab for the wireless configurations.
Verify Connectivity
- Verify that IP addresses are in the correct networks. All the end devices should be in 192.168.20.0/24 network. If they are not in the correct network, enter the following commands at the command prompt.
PC> ipconfig /release
PC> ipconfig /renew - Verify that all end devices in the Home can access www.server.pka.
- Verify that all end devices in the Home can access R1 via SSH with password cisco123.
PC> ssh –l admin 209.165.201.1
Script
Router R1
enable
configure t
hostname R1
interface g0/1
ip add 209.165.201.1 255.255.255.224
no shutdown
banner motd $Warning: Unauthorized access is prohibited!!$
line con 0
password cisco
6.4.1.2 Packet Tracer Answers
login
9.4.1.2 Packet Tracer Youtube
enable secret class
service password-encryption
ip domain-name networking.pka
Packet Tracer 9.4.1.2 Answers
crypto key generate rsa
1024
username admin password cisco123
line vty 0 4
transport input ssh
Packet Tracer 8.2.1.4 Answers
login local
Switch S1
enable
configure t
9.4 1.2 Packet Tracer Skills Integration Challenge Instructions Resuelto
hostname S1
interface vlan 1
9.4 1.2 Packet Tracer Skills Integration Challenge Instructions
ip address 209.165.201.2 255.255.255.224
no shutdown